Shade Cloth for Lettuce
Learn how shade cloth protects lettuce from heat and sun, which shade percentage to pick, how to set netting over beds, and why shade slows bolting.
Contents
Shade cloth for lettuce is a woven or knitted fabric stretched over a bed to cut sunlight and lower leaf temperature during hot weather. It keeps cool-season crops such as lettuce from bolting and from scorching while they head up. The cloth is rated by shade percentage, so the grade you hang decides how much light and heat reach the plants. This page explains which grade suits lettuce, how to rig the netting, and how shade netting differs from row cover.
Reading the shade percentage
Shade percentage describes how much of the incoming sunlight the fabric blocks, and lettuce grows well under a light to moderate grade. A low percentage passes plenty of light for steady leaf growth while taking the edge off midday sun. Heavier grades suit a hotter, brighter site but slow growth when skies stay dim. Match the grade to your summer light and heat rather than to a single number.
Setting netting over a bed
Hang shade netting on hoops, a frame, or a simple post and wire rig so the fabric sits well above the lettuce. Air must move freely under the cloth, so leave the sides open and never lay the fabric on the leaves. A gap of clear space between cloth and canopy lets hot air rise away from the plants. Anchor the edges against wind with cord, clips, or weights.
Shade, heat, and summer bolting
Lettuce bolts when warmth and long days push the plant into flowering, and the leaves turn bitter as the stem stretches. Shade cloth helps by cutting the radiant heat that loads the canopy at midday. Pairing the cloth with steady watering and mulch keeps the root zone cooler still. Cloth does not replace water or good timing, so sow lettuce for a cool window where you can.
Questions About Shade Cloth and Lettuce
What type of shade cloth suits lettuce?
A light to moderate woven or knitted shade cloth suits lettuce, because the crop needs good light along with relief from heat. Choose a grade that blocks part of the sun rather than the heavy fabric used for full-sun structures. Knitted netting lets air through and is easy to stretch over hoops. Woven fabric is stronger but blocks airflow more, so keep the sides open.
Which shade percent should I use for lettuce?
A shade percent in the lower range is the starting point for lettuce, and you adjust it as your summer heat and light dictate. Gentle shade takes the sting out of midday sun while leaving enough light for tender leaves. On a scorching, glaring site a heavier grade earns its place. Under cloud or weak light, a heavy grade slows growth and wastes the season.
How do I use shade cloth for growing lettuce?
Use shade cloth as a roof over the lettuce bed, held on hoops or a frame with the sides open for airflow. Drape the fabric so it never rests on the leaves, and secure the edges so wind cannot tear it loose. Water and mulch beneath the cloth as you would without it. Lift or remove the cloth when the heat passes and light becomes the limit.
Can I make a DIY shade cloth for lettuce?
A DIY shade cloth for lettuce can be made from a length of shade netting fixed to hoops, poles, or a wooden frame. Cut the netting wider than the bed and tie it down with cord or clips at each corner. Old curtain fabric or a woven sheet can serve for a short spell, though it blocks airflow and light unevenly. Keep every homemade rig clear of the leaves so air still moves.