How to Season a Comal: Cast Iron and Clay

Learn how to season a comal, whether cast iron or clay, with step-by-step instructions, maintenance tips, and recipe ideas. Get a durable, nonstick surface for tortillas, roasted vegetables, and more.

6 min readSeasoning and Caring for Kitchen Tools4 viewsHow to Season a Comal: Cast Iron and Clay
— · 0 votes
Contents
  1. What Is a Comal and Why Season It?
  2. How to Season a Cast Iron Comal
  3. Step 1: Clean the Comal
  4. Step 2: Apply a Thin Coat of Oil
  5. Step 3: Heat the Comal
  6. Step 4: Repeat as Needed
  7. Step 5: Use and Maintain
  8. How to Season a Clay Comal
  9. Step 1: Soak the Comal
  10. Step 2: Prepare a Garlic and Oil Mixture
  11. Step 3: Bake the Comal
  12. Step 4: Repeat if Necessary
  13. Step 5: Cure Over Time
  14. Comparison of Seasoning Cast Iron vs. Clay Comals
  15. Maintaining the Seasoning

To season a comal, start by washing it to remove factory residue, then dry thoroughly. For cast iron, rub a thin layer of high-smoke-point oil over the surface, heat it upside down in the oven or on the stovetop until the oil polymerizes, and repeat as needed. For clay, soak the comal in water, brush it with a garlic-and-oil mixture, and bake it slowly to create a natural nonstick coating. Regular use and proper cleaning will maintain the seasoning.

What Is a Comal and Why Season It?

A comal is a flat, round griddle used in Mexican and Central American cooking. Traditionally made from cast iron or clay, it is essential for heating tortillas, roasting chiles, toasting spices, and cooking ingredients for salsas. Seasoning a comal creates a natural, nonstick surface that prevents food from sticking and rust from forming. It also enhances flavor over time, much like a well-used cast iron skillet or a clay pot.

Cast iron comals are durable and excellent heat conductors. They can be used on gas, electric, or induction stovetops, and even over open flames. Clay comals, called comales de barro, add a subtle earthy flavor to foods and are traditionally used over direct flame or on a special diffuser for gas stoves. Both require seasoning before first use to perform their best.

How to Season a Cast Iron Comal

Seasoning a cast iron comal is similar to seasoning a cast iron skillet. The goal is to bond oil to the iron through heat, creating a hard, slick coating. Here is a step-by-step process:

Step 1: Clean the Comal

New cast iron comals often come with a protective wax or oil coating. Wash the comal thoroughly with hot water and a small amount of mild dish soap. Use a stiff brush or non-abrasive scrubber to remove any residue. Rinse and dry completely with a towel. It is important to dry immediately to prevent flash rust.

Step 2: Apply a Thin Coat of Oil

Choose an oil with a high smoke point, such as vegetable oil, canola oil, grapeseed oil, or melted shortening. Avoid oils that go rancid quickly, like flaxseed oil (which can flake) or extra-virgin olive oil (low smoke point). Pour a small amount of oil onto a paper towel or clean cloth and rub it all over the comal, including the bottom and handle. The layer should be very thin; too much oil will become sticky.

Step 3: Heat the Comal

There are two common methods:

  • Oven method: Place the oiled comal upside down on the middle rack of a cold oven. Put a sheet of aluminum foil on the lower rack to catch any drips. Heat the oven to 450–500°F (230–260°C). Once it reaches temperature, bake for 1 hour. Turn off the oven and let the comal cool completely inside.
  • Stovetop method: Place the comal over medium-high heat. Let it heat until it begins to smoke, then reduce the heat. Let it smoke for about 5–10 minutes, rotating occasionally if using a gas flame. Turn off the heat and let it cool.

The comal will darken and may look patchy; that is normal.

Step 4: Repeat as Needed

For a more durable seasoning, repeat the oiling and heating process 2–3 times. After the first seasoning, you can simply wipe a thin layer of oil onto the hot comal after each use to maintain it.

Step 5: Use and Maintain

After seasoning, avoid cooking acidic foods (like tomatoes) for the first few uses, as acid can break down the seasoning. Cook fatty foods like bacon or quesadillas to build up the patina. Clean the comal with hot water and a stiff brush; avoid soap if possible. Dry thoroughly and rub with a light coat of oil before storing.

How to Season a Clay Comal

Clay comals require a different process because the material is porous. Seasoning helps seal the pores and creates a nonstick surface. Here is how to season a clay comal for the first time:

Step 1: Soak the Comal

Submerge the clay comal in water for at least 12 hours, or overnight. This allows the clay to absorb water, which prevents cracking during heating. After soaking, remove and let it air dry until no longer dripping wet but still slightly damp.

Step 2: Prepare a Garlic and Oil Mixture

Traditionally, a paste of crushed garlic and oil is used. You can use vegetable oil or lard. Crush 2–3 garlic cloves and mix with about 2 tablespoons of oil. Rub this mixture all over the cooking surface of the comal using a cloth or your hands. Some also rub the back, but the cooking surface is most important.

Step 3: Bake the Comal

Place the comal in a cold oven. Set the temperature to 300°F (150°C) and bake for 30 minutes. Then increase the temperature to 350°F (175°C) and bake for another 30 minutes. Turn off the oven and let the comal cool completely inside. This gradual heating prevents cracking.

Alternatively, you can season on the stovetop over low heat, but the oven is more reliable for even heating.

Step 4: Repeat if Necessary

You may need to repeat the garlic-oil rub and baking one more time if the surface looks patchy or feels rough. After seasoning, the comal should have a slightly darker, smoother surface.

Step 5: Cure Over Time

The comal will continue to improve with use. Cook tortillas or roast vegetables regularly to build up a natural nonstick coating. Avoid sudden temperature changes, like placing a hot comal on a cold surface, to prevent cracking.

Comparison of Seasoning Cast Iron vs. Clay Comals

FeatureCast Iron ComalClay Comal
Initial preparationWash with soap, drySoak in water overnight
Seasoning agentHigh-smoke-point oilGarlic and oil mixture
Heating methodOven at 450–500°F or stovetopOven gradually from 300°F to 350°F
Number of cycles2–31–2
MaintenanceAvoid soap, oil lightly after washingWipe with water, dry thoroughly, occasional re-seasoning
DurabilityVery durable, can handle high heat and metal utensilsFragile, prone to cracking, avoid thermal shock

Maintaining the Seasoning

Once your comal is seasoned, proper care keeps it nonstick and rust-free. For cast iron, after each use, wipe out food debris with a paper towel or rinse with hot water. Use a brush or chainmail scrubber for stuck-on bits, but avoid harsh detergents. Dry immediately and rub a few drops of oil over the surface while still warm. Store in a dry place.

For clay comals, never use soap, as it can absorb into the pores. Rinse with hot water and scrub gently with a brush or abrasive pad. Dry completely before storing. If the seasoning starts to wear off (food sticks or the surface looks dull), repeat the seasoning process.

Both types benefit from regular use. Cooking tortillas, roasting vegetables, and toasting spices help build up the seasoning over time. With a well-seasoned comal, you can make perfect charred tortillas, blistered peppers for salsa, and beautifully seared meats.

Seasoning a comal, whether cast iron or clay, is a simple process that connects you to centuries of tradition. With a little care, your comal will become a cherished tool for taco nights and beyond.