Advance Taco Prep Equipment
A practical guide to Advance Tabco prep tables and prep sinks for taco night, covering how each piece works, how to pair them, and how to set up a safe station.
Contents
- What Advance Tabco prep equipment covers
- How a prep table earns its place
- What a prep sink does for taco night
- Combining a prep table with a sink
- Sizing equipment to your taco spread
- Setting up the station safely
- Care and upkeep of stainless prep units
- Advance Tabco prep equipment questions
- What is an Advance Tabco prep sink used for?
- What does an Advance Tabco prep table give you for taco night?
- Is an Advance Tabco prep table with sink worth the space?
- Where should the sink sit on a prep table with sink?
- Can you install a prep table with sink yourself?
Advance Taco prep equipment means the stainless workhorses that hold your taco night together: a prep table for chopping and assembly, and a prep sink for washing produce and tools. Advance Tabco makes both as commercial kitchen equipment built for steady use. The pairing gives you one surface to wash and one to build on, kept apart so water and food do not share a space.
- A prep table gives you a flat stainless surface for chopping toppings and lining up tortillas.
- A prep sink handles washing produce, herbs and small tools before they reach the table.
- A prep table with sink combines both jobs in one unit when floor space is tight.
- Keep the washing side and the assembly side clearly separated to avoid cross-contamination.
- Match the unit size to your counter run and the number of people working at once.
What Advance Tabco prep equipment covers
Advance Tabco is a brand of commercial kitchen equipment, and its prep line centers on stainless steel tables and sinks for food work. The pieces are designed for kitchens where surfaces get washed, scrubbed and used again through a long service.
A prep table is a flat work surface, often with a lower shelf, used for cutting, portioning and assembling food. A prep sink is a basin unit with a drainboard or two, meant for washing ingredients and small wares near the work area.
The two pieces solve different problems, and taco prep needs both. Toppings such as onion, cilantro, lime and salsa involve washing first and chopping second. Advance Tabco builds each unit for that split between wet work and dry work.
How a prep table earns its place
A prep table gives taco night a dedicated surface for building components, from diced onion to a row of filled tortillas. The flat stainless top wipes clean between tasks and does not hold onto odors the way a porous surface can.
Lower shelves on a prep table hold sheet pans, bowls and storage containers within reach. That keeps the top clear for the work itself instead of stacking everything on the cutting area.
Choose a table length that fits your counter run and the number of hands working. A crowded table slows assembly and pushes bowls toward the edge, so measure before you order.
What a prep sink does for taco night
A prep sink gives you a washing station close to the food, which matters when herbs, peppers and limes arrive dirty. Washing at a distant main sink means carrying dripping produce across the kitchen.
Drainboards on either side of the basin give wet items somewhere to sit while they drain. That keeps water from pooling on your cutting surface and softening tortillas.
A prep sink also takes small tools, colanders and storage containers that need a rinse mid-task. Keeping that washing separate from the assembly surface protects the food you are about to serve.
Combining a prep table with a sink
A prep table with sink puts washing and assembly on one footprint, which suits a kitchen with limited counter space. The sink sits at one end and the flat work area takes the rest.
Order of work matters on a combined unit, so place the sink upstream of the cutting area. Produce gets washed, then moves along the table to be chopped and arranged.
A combined table with sink needs a drain line and a water supply at that spot. Confirm the plumbing before you commit to the position, since moving a plumbed unit later means redoing the connection.
Sizing equipment to your taco spread
The right size depends on how many components you build and how many people work at the station. A small spread needs little more than a basin and a short table, while a wide spread of salsas and fillings needs more flat space.
Count the bowls and trays you plan to set out before choosing a table length. Each container needs a spot on the top or the shelf, and the cutting area needs room to work.
Basin depth matters for washing bunches of herbs and heads of lettuce without splashing. A deeper bowl also handles larger pots and trays when you clean up.
- Measure the counter run and note where plumbing can reach.
- Count bowls, trays and pans that must sit within arm's reach.
- Decide whether washing happens at the station or elsewhere.
- Check the basin depth against the largest item you plan to wash.
- Leave clear floor space in front of the unit for a person to stand.
Setting up the station safely
Separate the washing side from the assembly side so water and raw produce do not meet ready-to-eat food. A clear physical gap between basin and cutting area does that job.
Clean and sanitize the table between tasks, especially after raw meat or poultry has touched the surface. Stainless steel tolerates this routine well when it is done consistently.
Plumbing, gas and electrical work at a prep station belongs to a trained specialist. Have a qualified plumber handle drain and supply connections rather than improvising them.
Care and upkeep of stainless prep units
Stainless prep equipment cleans easily with warm water, a mild detergent and a soft cloth. Rinse away detergent residue so it does not film over the surface.
Avoid steel wool and harsh chlorine solutions on stainless, since they can pit the finish. A soft abrasive pad used gently handles most stuck food without damage.
Wipe the basin and drainboard dry after washing to limit standing water. Inspect drain seals and fittings from time to time, and call a plumber if a leak appears.
Advance Tabco prep equipment questions
What is an Advance Tabco prep sink used for?
An Advance Tabco prep sink is a washing basin placed near food work for rinsing produce, herbs and small tools. It keeps washing close to the cutting area so wet items do not travel across the kitchen. Drainboards give washed items a place to drain before they reach the table.
What does an Advance Tabco prep table give you for taco night?
An Advance Tabco prep table gives you a flat stainless surface for chopping toppings, portioning fillings and assembling tortillas. A lower shelf holds bowls and pans within reach. The stainless top wipes clean between tasks and resists holding odors.
Is an Advance Tabco prep table with sink worth the space?
An Advance Tabco prep table with sink suits a kitchen where counter space is limited and washing needs to happen at the station. It combines a basin and a work surface on one footprint. Confirm that plumbing can reach the spot before you place the unit.
Where should the sink sit on a prep table with sink?
The sink on a prep table with sink works well at the upstream end, so produce is washed before it reaches the cutting area. That flow keeps water away from food being assembled. Leave a clear gap between basin and cutting surface.
Can you install a prep table with sink yourself?
No, a prep table with sink needs a water supply and a drain line connected by a qualified plumber. Improper connections can leak or contaminate water. Have a trained specialist handle the plumbing and check it before use.
Read next
-
Different Taco Ideas for Variety
-
Tortilla Press vs Rolling Pin and Rolling Tortillas Without a Press
-
Easy Taco Topping Ideas
-
Cooking Steak and Beef Taco Meat on the Stove
-
Where to Find a Kitchen Scale Near You
-
Comal Cooking Classes: Choosing a Hands-On Lesson in English
-
How to Make Molcajete Salsa: Roasted, Ground & Ready for Taco Night